Fixed displacement plug-in motor A2FE

Features
– Fixed displacement plug-in motor with axially tapered plunger rotor in helical design for hydrostatic transmission in open and closed circuits
– Integration in the mechanical gearbox due to the recessed mounting flange in the center of the housing (very space-saving design)
– Output speed depends on the pump flow and the motor displacement
– Output torque increases with the differential pressure between the high-pressure side and the low-pressure side.
– Small dimensions
– High overall efficiency
– Complete unit, ready to be assembled and tested
– Easy to install, just plug into the mechanical gearbox
– No configuration specifications required for installation

Hydraulic oils
Before you start project planning, please refer to our technical data sheets RC 90220
(mineral oils), RC 90221 (environmentally friendly hydraulic oils), RC 90222 (HFD hydraulic oils) and RC 90223 (HFA, HFB, HFC hydraulic oils) for detailed information on hydraulic oil selection and application conditions.
The plug-in motor A2FE is not suitable for use with HFA hydraulic oils. When using HFB,
HFC, HFD or environmentally friendly hydraulic oils, the technical parameters or other
seal restrictions must be observed.

Note
The case drain temperature (influenced by pressure and speed) may be higher than the circuit or tank temperature. However, the temperature of any part of the component must not exceed 115 °C. The temperature differences specified below should be taken into account when determining the viscosity of the hydraulic oil at the bearing.
If the above conditions cannot be met due to extreme operating parameters, we recommend the use of flushing and filling valves

Real photos

  MKS hydraulic specializes in producing, sales and maintenance of hydraulic pumps and motors. The company has been working in hydraulic field since 1995 and wealth professional knowledge and field experience. We have developed and produced A4VSO, A4FO, A4FM, A10VSO, Parker PV varies hydraulic pumps and motors. Other series are also in the researching and developing design. With the concept “quality wins market, integrity casts the brand”, we strictly implement the testing standard and strive to be a hydraulic company worthy of customer’s trust.
  MKS products have been widely used in iron and steel metallurgy, forging, ceramics, water conservancy and hydra-power, construction machinery, ship, mining, agricultural machinery and other fields.

  MKS technical team has more than 10 R&D and designer which committed to research and development of hydraulic components,3D dynamic simulation process to upgrade,cooperating with advanced testing equipment, makes every effort to keep improving of new varieties of each series dedicated high durability efficiency parts as our priority, to meet the needs of users, and pursuit of every perfect products is the aim. The R&D department is a cohesion vitality and pursues of the enterprise brand.

  MKS main products are: plunger pump, vane pump, gear pump, direction valve, pressure valve, flow control valve, proportional valve, cartridge valve and hydraulic fittings, etc. We undertake all kinds of hydraulic system equipment design and manufacturing. The products are widely used in engineering, plastic machinery, shoes, casting, metallurgical, mining, metal cutting tools and other kinds of hydraulic system.