Axial piston variable Hydraulic pump , A4VSO125DR/10R-PPB13N00
Power controller LR2 with hyperbolic characteristic curve
(for further information, see data sheet 92064)
The hyperbolic power controller keeps the specified drive power
constant at the same drive speed.
Optional:
▶▶ Pressure control (LR2D), remotely controllable (LR2G);
▶▶ Flow control
▶▶ (LR2F, LR2S);
▶▶ Hydraulic stroke limiter (LR2H);
▶▶ Mechanical stroke limiter (LR2Z);
▶▶ Hydraulic two-point control (LR2Z);
▶▶ With electric unloading valve as starting aid (LR2Y).
Filtration of the hydraulic fluid
Finer filtration improves the cleanliness level of the hydraulic
fluid, which increases the service life of the axial piston unit.
A cleanliness level of at least 20/18/15 is to be maintained
according to ISO 4406.
At a hydraulic fluid viscosity of less than 10 mm2/s (e.g. due to
high temperatures during short-time duty) at the drain port, a
cleanliness level of at least 19/17/14 according to ISO 4406 is
required.
For example, the viscosity corresponds to 10 mm2/s:
–– HLP 32 a temperature of 73 °C
–– HLP 46 a temperature of 85 °C
Technical data
Robust high-pressure pump for industrial applications.
Size 40 ... 1000.
Nominal pressure 350 bar.
Maximum pressure 400 bar.
Open circuit.
Features
Variable pump with axial piston rotary group of swashplate design
for hydrostatic drives in open circuit.
Flow is proportional to the drive speed and displacement.
The flow can be infinitely varied by adjusting the swashplate
angle.
Excellent suction performance.
Low noise level.
Long service life.
Modular design.
Variable through drive options.
Visual swivel angle indicator.
Freely variable installation position.
Suitable for variable-speed drives.
HF mode for reduced data possible for HFC mode,special version
available.
